scotts wide mount .....
more metal work , it never ends .......
this week , blast then of to the painters ;]
all before xmas
above image very thin type panel trim ;]

above Ants primi
molly orange
below the old pearl 3 way and the new base colour
old or new paint ?
later to add baby blue graphs

the 152l2 moves on .....

very nearly 

the dyno reads 18 bhp

a few more
pauls 50

mr franklins graffs
still in progress ....

disaster !
clutch bell fails mmmmmmm
all rivits sheer accept 1,
left clutch bell , new and improved :]
drill and tig weld , sorted .
this will be standard on all large frame
motor rebuilds .

ants bell crank 54 stroke ,
should give about 145cc ;]p
thanks john - jahspeed

a bit of primer ,
nearly ready for paint

ants primi,
lots of sanding ...

simons 152l2

almost .....
 fly tech ignition, 360 reed, 28mm carb, polossi 210, 21, 68 gearing and more ;]p

for sale
50 - 90 headset converted for disc brake , will b blasted and in primer
mail me thanks

new project px 220
tank, motor and paint .....

anthonys 210
just over 18 bhp on the dyno, saturday @ jahspeed .
also new rear light with leds ;]

mr pauls small door
after a lot of cutting grinding and new door hanger hinges ;]

fresh from the machine shop
48mm ID
next we weld ...

brakes, lines etc

all sanded ready for paint.
brake hose, kill switch cable, throttle cable and brake switch cable ....

headset production line ....

base colour grey pearl
then blue
and finally green
pauls small door

priming begins
dry build on headset
pauls small door

sanding, cutting and grinding
pauls small door

prep work for circular type speedo
Ants primi

after market doors are not always great.
after a bit of a fight - the grinder wins .all done

fresh back from the machine shop
new collar insert, no more leaks
from the selector ;]
pauls small frame cases live again

ants primi
after bending, grinding and a little cutting the door looks almost right,
another stretch on the cards ........

pauls 50
after a lot of filler removal from the previous painter mmmmm
and a bit of hammer action, the test trim looks about in the right place

chris
with his newly finished
now the joys of setting up the instrumentation .......

simon 152l2
that old mudguard palava again .....

pauls
all stripped , bottom image -
which way to go , green pearl , blue pearl ......
darker is better me thinks ....

pauls little blue small door
a little more on the casings ;]
new engine mounts

slight redesign on the rgv
cut, shape and paint next

the orange moves on
in progress radial master, lots of cutting ....

all done,
polini 130, polini pipe, reed ,25mil carb , race crank
and a lot of porting ;]